Install
...
Clean the area where the adjustable
mount
will
be
installed with
an
alcohol pad.
If
you are using the
adhesive
disk
apply
it
firmly
to a flat, smooth area
or the dash. (Allow to cure for
24
hours.)
2
See the User Manual
on
the CD-ROM for additional
information
on
installation.
Some areas have laws
restricting
the
mounting
of any devices
on
the
windshield.
Be
sure to check your local laws before
mounting
the
Magellan RoadMate to the
windshield.
Please note: Accessories shown here may
differ
slightly
from
the accessories provided with your Magellan RoadMate.
Snap the adjustable
mount
into the
cradle. Attach the
mount
to the
windshield or the adhesive disk.
Attach the Magellan Road Mate to the
basic cradle.
PI
ug one end of the veh icle power
adapter to USB connector
on
the
Magellan Road Mate and the other
ina
vehicle power receptacle.
To Next Page
Loading...
