6. If the sensor chosen is not compatible
with the active Activity Profile, a warning
will appear. The sensor can still be
enabled, the warning is a reminder that
the sensor is not compatible with the
current activity type selected.
7. Press ENTER to toggle the current state
of the sensor (enabled or disabled).
8. When enabled information on the status
of the sensor is displayed.
Once a sensor has been enabled, Switch
will begin searching for the sensor. After
communication with the sensor has been
established a notification will be displayed
indicating that the sensor has been found and
connected.
Status Definitions :
•Connected - Switch has made a connection
with the sensor.
•Searching - Switch is searching for the
sensor.
•Standby - The sensor is enabled but is not
compatible with the current activity type.
When the activity type is changed to one
that is compatible with the sensor, Switch
will begin searching automatically.
To Next Page
Loading...
Need help?
General