vehicle rollover, should be padded with material that complies to FMVSS 201.
Only spill proof batteries (e.g. gel-cell) should be installed on wheelchairs that are
transported in motor vehicles.
Back supports with adjustable recline angles should not be reclined to more than 30° to the
vertical during vehicle travel unless necessary for the postural and medical needs of the
occupant
For people who use heavy wheelchairs transportation in larger vehicles is recommended
when the option exists
The wheelchair should be inspected by a manufacturer’s representative before reuse
following involvement in any type of collision
Care should be taken when applying the occupant restraint to position the seatbelt buckle
so that the release button will not be contacted by wheelchair components during a crash
To Next Page
Loading...