Magic Frontier V6 - Page 43

Page 43
absorbing padding placed in the gap between the tray edge and the wheelchair occupant
The wheelchair manufacturer should be consulted for questions about using the wheelchair
for seating in a motor vehicle,
Sufficient forward and rearward clear space should be provided around the wheelchair
occupant as shown in below.
The forward clear space zone (FCZ) needs to be larger when a shoulder belt restraint is not
used
Vehicle interior components that cannot be removed from the clear zones of Error!
Reference source not found., or that are near the wheelchair occupant space at a level that
may be contacted by a wheelchair occupant’s head during a side impact collision or a