Troubleshooting Guide
Situation
Machine will
not start, makes
continuous
beeping sound
Blender motor
not functioning
Spillover
Other issues
*See page 4, item 10
Cause
Not enough liquid inside
pitcher
Dirty overow sensor*
Temperature not
selected before Cycle
Time
Blender motor starts once
extraction temperature is
reached
Pitcher lled under MIN
line or above MAX line
Level of liquid is above
MAX line
Too much soap added
during Clean cycle
Contact us at:
MagicalButter.com
Solutions
Be sure level of contents
is between MIN and
MAX lines
Clean overow sensor*
First select Temperature;
then select Cycle Time
Wait about 15 minutes into
cooking cycle for blending
to begin
Use correct amount of
ingredients per owner’s
manual
Be sure level of contents
is below MAX line
Reduce amount of soap
used during Clean cycle
Contact us at:
MagicalButter.com
11
Balancing Nature & Technology
TM
To Next Page
Loading...