What to do if my Magnavox TV DVD Combo has no power?
First, ensure the AC power cord is securely plugged into the mains socket. If it is, unplug the TV, wait 60 seconds, then plug it back in and turn the television on again.
Why is there no sound on my Magnavox TV DVD Combo?
Increase the volume and check if the TV is muted by pressing the MUTE button on the remote. Note that the TV automatically switches off the sound when no signal is detected; this is normal.
What to do if my Magnavox TV DVD Combo has no picture?
Check the antenna connections at the bottom of the TV to ensure they are properly connected. Also, try another channel in case there is a broadcast station issue. Adjust the contrast and brightness settings and try another auto picture setting. Verify the Closed Captions control and that you've selected the correct AV source, as some TEXT modes could block the screen.
Why is my Magnavox TV DVD Combo television not responding to the remote control?
Check if the batteries in the remote are working and replace them if needed. Clean the remote control sensor lens on the TV. Ensure you're within approximately twenty feet of the TV and that the remote is in the correct mode. You can also use the buttons on top of the TV.
What to do if my Magnavox TV DVD Combo DVD player cannot read CDs/DVDs?
Try using a commonly available cleaning CD/DVD to clean the lens before considering sending the DVD player for repair.
What to do if my Magnavox TV DVD Combo disc can’t be played?
Ensure the DVD+R/CD-R is finalized and the disc label is facing up. Try another disc to check if the disc is defective, and verify that the region code is correct.
Why is there no picture (DVD) on my Magnavox TV DVD Combo?
Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen and check if the TV is switched on.
What to do if the player does not respond to the remote control of my Magnavox TV DVD Combo?
Aim the remote control directly at the sensor on the front of the player. Reduce the distance to the player. Replace the batteries in the remote control. Re-insert the batteries with their polarities (+/– signs) as indicated.
Why is there no sound or distorted sound on my Magnavox TV DVD Combo?
Adjust the volume of the TV. Ensure that you select stereo output on your disc (except multichannel).
What to do if my Magnavox TV DVD Combo has a snowish picture and noise?
Check the antenna connection to ensure it is properly connected.
General| Comb filter | 3D |
|---|---|
| Response time | 8 ms |
| Display diagonal | 31.5 \ |
| Progressive scan | Yes |
| Display brightness | 500 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Native refresh rate | 60 Hz |
| Supported video modes | 480i, 480p, 720p, 1080i |
| Contrast ratio (typical) | 1200:1 |
| Display diagonal (metric) | 81 cm |
| Screen format adjustments | 4:3, 14:9, Zoom |
| Viewing angle, horizontal | 176 ° |
| Supported graphics resolutions | 640 x 480 (VGA), 720 x 480, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 768 (WXGA) |
| Operating temperature (T-T) | 5 - 40 °C |
| Package depth | 223.01 mm |
| Package width | 975.1 mm |
| Package height | 648.9 mm |
| Package weight | 19558.9 g |
| Teletext function | No |
| Audio formats supported | MP3, PCM, WAV |
| Image formats supported | JPG |
| Video formats supported | DIVX, MPEG1, MPEG2 |
| Audio (L/R) in | 3 |
| SCART ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio coaxial out | 1 |
| Component video (YPbPr/YCbCr) out | 2 |
| Product color | Black |
| Panel mounting interface | 400 x 200 mm |
| Playback modes | Rotation, Slideshow, Zoom |
| Disc types supported | CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Headphone connectivity | 3.5 mm |
| Cables included | AC |
| Tuner type | Analog |
| Supported TV bands | Hyperband, S Band, UHF, VHF |
| Analog signal format system | NTSC |
| Audio decoders | Dolby Digital, Dolby Digital AC3 |
| RMS rated power | 10 W |
| AC input voltage | 90 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 150 W |
Weight and Dimensions| Depth (with stand) | 252.22 mm |
|---|---|
| Width (with stand) | 790.7 mm |
| Height (with stand) | 582.67 mm |
| Weight (with stand) | 16329.32 g |
| Depth (without stand) | 154.17 mm |
| Height (without stand) | 544.57 mm |
| Weight (without stand) | 14288.15 g |
To Next Page
