To Next PageTo Next PageHow to fix Magnavox TV DVD Combo when it has no power?
If your Magnavox TV DVD Combo has no power, ensure the power plug is securely connected to an AC outlet. If there was a power failure, check the breaker.
What to do if my Magnavox MWC13D6 TV DVD Combo has poor or no picture?
If you're experiencing poor or no picture on your Magnavox TV DVD Combo, verify that the antenna or cable is properly connected and check for any broken pins or wires in the antenna cable. Also, check for sources of reception disturbance. Press [SELECT] to ensure the correct mode is selected. Perform a channel scan to memorize available TV channels. Try another channel to rule out station problems. Adjust the picture controls (COLOR/CONTRAST/BRIGHT etc.). Finally, check for magnetism from nearby appliances and try degaussing.
Why is my Magnavox TV DVD Combo remote control not working?
If your Magnavox TV DVD Combo remote control isn't working, first check if the batteries are weak or inserted incorrectly. Replace weak batteries, ensuring correct polarity (+/- signs). Aim the remote at the remote sensor within 23 feet (7 m) of the unit, removing any obstacles blocking the infrared signal. Check the infrared signal output. Select the correct mode using the [SELECT] button. Note that the operable range is 10 feet (3 m) within 15° of the unit.
How to troubleshoot poor or no sound on Magnavox MWC13D6?
To troubleshoot poor or no sound on your Magnavox TV DVD Combo, begin by adjusting the volume control using the [VOL. / ] buttons. If the issue persists, try switching to another channel to determine if the problem is specific to the station.
What to do if my Magnavox MWC13D6 TV DVD Combo disc cannot be played?
If your Magnavox TV DVD Combo isn't playing a disc, start by cleaning the disc. Ensure the disc is placed correctly, with the label side up. If parental settings are enabled, cancel them or change the control level.
How do I remove a black box from my Magnavox MWC13D6 screen?
If a black box appears on your Magnavox TV DVD Combo screen, it indicates that you are in TEXT mode. To remove it, select CAPTION mode or 'OFF'.
Why are there misspellings in the captions on my Magnavox MWC13D6 TV DVD Combo?
Misspellings in captions on your Magnavox TV DVD Combo are due to errors made by the closed captioning production company, which can occur during a live broadcast but should not happen in a prerecorded program.
Why is there a delay or incomplete text in captions on my Magnavox MWC13D6?
A few seconds of delay in captions is common for live broadcasts on your Magnavox TV DVD Combo. If the dialogue exceeds the display capacity (220 words per minute), selective editing is used to keep the captions up-to-date with the current TV screen dialogue.
What causes scrambled captions with white boxes on my Magnavox MWC13D6?
Scrambled captions with white boxes on your Magnavox TV DVD Combo are caused by interferences from buildings, power lines, thunderstorms, etc.
Why are there no captions in a program that should have them on my Magnavox TV DVD Combo?
The broadcast may use a time compression process to speed up the program. The decoder cannot read the compressed information, and captions will be lost.
General| Screen Size | 13 inches |
|---|---|
| Display Type | CRT |
| Aspect Ratio | 4:3 |
| Tuner | NTSC |
| Built-in Speakers | Yes |
| Power Source | AC 120V, 60Hz |
| DVD Player | Yes |
| Input Ports | Composite video |
| DVD Formats Supported | DVD, CD |
| Outputs | Composite Video |
Safety and operating instructions for using the appliance, covering electrical hazards, placement, and care.
Connect the incoming cable to the ANT. jack on the rear of the unit.
Connect audio/video output jacks of external source to the unit's input jacks.
Instructions for inserting AA batteries into the remote control for operation.
Identifies and describes the controls located on the front of the unit.
Lists and describes buttons on the remote control for operating the unit.
Guides through the initial language selection and automatic channel programming.
Instructions on how to turn on the unit and select TV channels.
Adjustments for sleep timer settings and picture quality controls.
Information on viewing programs with dialogue or text captions.
Procedures for auto channel programming and adding/deleting channels.
How to select the language for on-screen menus and prompts.
Feature to block inappropriate material for children based on TV ratings.
Setting parental control levels based on MPAA film ratings.
How to change the access code for parental controls and V-chip settings.
Lists the types of discs that can be played on the unit.
Lists discs that should not be played to avoid malfunction.
Instructions for starting, pausing, and stopping disc playback.
Navigating disc menus and title menus for special features.
Overview of available playback functions and their corresponding pages.
Selecting audio language or sound mode during playback.
Selecting subtitle language or turning subtitles off.
Changing camera angles for scenes shot from multiple perspectives.
Enlarging the video image and panning through the zoomed picture.
Adjusting the black level of the picture to make dark parts brighter.
Options to start playback at a specific track, chapter, or title.
Starting playback at a specific time on the disc.
Setting and playing from markers to remember favorite places on a disc.
Repeating playback of a single track or all tracks.
Repeating playback of a specific title or chapter.
Setting custom start (A) and end (B) points for repeat playback.
Determining the playing order of tracks on a disc.
Shuffling the playing order of tracks for random playback.
Displaying current track, title, bit rate, and repeat setting.
Accessing and modifying various DVD player settings via a custom menu.
Adjusting TV mode, letter box, pan & scan, and still mode settings.
Configuring audio settings, including DRC (Dynamic Range Control).
Setting parental control levels to restrict playback based on disc ratings.
Changing the password for parental controls to prevent unauthorized access.
Resetting DVD setup menu items to their default factory settings.
Configuring angle icon display and auto power off features.
Clearing color errors on the TV screen caused by magnetism.
What to do if the laser pickup unit may be dirty and affecting performance.
Instructions on how to clean the unit's exterior surfaces safely.
Guidelines on when and how to seek professional service for the unit.
How to check if the remote control is sending a proper infrared signal.
Proper methods for handling and cleaning discs to ensure playback.
A chart showing common cable TV channel designations and their corresponding TV display numbers.
A list of language codes used for audio and subtitle settings.
Technical details about the TV and DVD player's general features.
Information on terminals, operating temperature, and power requirements.
Details regarding the unit's sound output and power consumption.
