EN
21
C
HANGING THE DVD SET UP ITEMS
ON-SCREEN INFORMATION / CHANGING THE DVD SET UP ITEMS
DVD SECTION
1 In the stop mode, press
[SET-UP] twice to display the
DVD SETUP menu.
NOTES:
• Pressing [SET-UP] once will
show TV SETUP menu partly.
• If the menu does not appear, press [STOP
CC
] first.
Make sure the unit is in DVD mode before setting.
2 Use [
KK
/
LL
] to select "CUSTOM", then press
[ENTER].
3 Use [
KK
/
LL
] to select the
desired item, then press
[ENTER].
Refer to the pages below for
continuation to set up each item.
• LANGUAGE setting: P21
• DISPLAY setting: P22
• AUDIO setting: P22
• PARENTAL setting: P22
• OTHERS setting: P23
LANGUAGE SETTING
4 Use [
KK
/
LL
] to select the
desired item, then press
[ENTER].
• AUDIO: Sets the audio language.
• SUBTITLE: Sets the subtitle language.
• DISC MENU: Sets the language for DVD menu.
5 Use [
KK
/
LL
] to select your desired language
from the list, then press
[ENTER].
6 Press [SET-UP] to exit the menu.
NOTES:
• If your desired language is not
on the list, select "OTHER" and
enter the code of the language.
(Refer to "LANGUAGE CODE
LIST" on page 27.)
• This feature may not be valid due to default setting
of the disc. In this case, press
[MODE] to select the
language. (Refer to "AUDIO MENU" on page 17.)
• If you select a language that is not supported by the
disc, subtitle will be "OFF" automatically and the
default language of the disc will be selected.
•To change the language for the on-screen menus,
call up the TV SETUP menu by pressing
[SET-UP] once and set the language. (Refer to "ON-
SCREEN MENU LANGUAGE" on page 11.)
Please enter a 4-digit language code.
To Next Page
Loading...
Need help?
General
