To Next PageTo Next PageWhat to do if Magnavox TV is on but there is no screen image?
If your Magnavox TV has power but no screen image, verify the antenna, cable receiver, or satellite box connections are correct. Also, check that all cables to the TV are connected to the correct output jack of your Blu-ray/DVD recorder or similar device. For PC mode, ensure your computer isn't in sleep mode. Finally, confirm the correct input mode is selected by pressing SOURCE.
Display| panel resolution | 720p, 1366 x 768 pixels |
|---|---|
| aspect ratio | Widescreen |
| picture enhancement | Progressive scan, 3D Combfilter, Digital Noise Reduction, Dynamic contrast enhancement, 3/2 - 2/2 motion pull-down, Clear Pix Engine Plus |
Power| mains power | 120V/60Hz |
|---|---|
| standby power consumption | <0.5W |
| power consumption | 54 W |
| ambient temperature | 5°C to 40°C (41°F to 104°F) |
Audio| sound system | Mono, Stereo, SAP, Dolby Digital (AC-3) |
|---|---|
| sound enhancement | SRS TruSurround XT |
| output power (RMS) | 2 x 10W |
Weight and Dimensions| diagonal screen size | 32 inch / 81 cm |
|---|---|
| visible screen diagonal | 31.5 inch |
| set dimensions | 29.8 x 18.7 x 2.3 inch |
| set dimensions with stand | 29.8 x 20.4 x 7.1 inch |
| product weight | 14.56 lb |
| product weight with stand | 15.22 lb |
| box dimensions | 33.4 x 21.7 x 4.7 inch |
| weight including packaging | 18.3 lb |
