Playing a Disc
1
Press STANDBY-ON 2 to turn on the TV/DVD.
2
Press EJECT / to open the disc tray. Put a Disc
in the tray with the label facing up and the shiny side
facing down.
3
Press PLAY B to close the tray. Playback may
start automatically. If not, press PLAY B again.
If a DVD Disc menu appears, use the 1 234, ENTER, or
Number buttons to select features or start playback.
Follow the instructions in the menu.
4
To stop playing the Disc, press STOP 9.
9MDPF20 / 8239 300 27161
Setting Up the TV/DVD the First Time
1
Press STANDBY-ON 2 to turn on the TV/DVD.
2
Press ENTER repeatedly to select English, French,
or Spanish as the language for TV/DVD setup menus.
3
Press 3 or 4 to select AUTO PRESET.Then press
ENTER to set up TV channels. When setup is
complete, the lowest TV channel will appear on the
TV/DVD.
4
To watch TV, press the CH. 3 or 4 buttons to
select memorized channels. Remember, if you are using a
Cable Box or Satellite Receiver, set the TV/DVD to
channel 3 or 4. Change channels at the Cable Box or
Satellite Receiver.
- SET UP-
2 LANGUAGE
[ENGLISH] ESP FRA
AUTO PRESET
Playable Discs
The TV/DVD will play the following Discs.
DVDs must have a Region Code of ALL regions or Region 1.
DVDs must be recorded in the NTSC Color System.
To Previous Page
Loading...
Need help?
General
