on your Antenna or Cable TV
system.
CHANNEL EDIT makes it easy
for you to add other channels or
drop unwanted channels from
the TV's memory.
_ Press the MENU but-
ton, then press the
CH(annel) A/V buttons to
select SETUP.
SmartLock REVIEW
SETUP
EXIT
[GHTNESS IIIIIHI 2
4>
_:iiupVOL!u_i neu)e
Press the CH(annel)
A/V buttons to select
CHANNEL EDIT.
iNSTALL
_ Press the VOL(ume)
I_ or _1 button to continue
to the CHANNEL EDIT
menu.
CHANNEL will be selected.
I_ CHANNEL 10
SKIPPED YES
_ While CHANNEL is
selected, press the
VOL(ume) liD"or _1 button
or the Number buttons to
select the channel you
want to add or skip.
Press the CH(annel)
A/V buttons to select
SKIPPED.
Then, press the VOL(ume)
I_ or _1 button to set
SKIPPED to YES (if you want
to skip past the channel when
using the CH(annel) AIV but-
tons) or NO (if you want the
channel to be available when
you are using the CH(annel)
AIr buttons).
_ Press the MENU but-
ton.
SETUP I_
EXIT
BRIGHTNESS IIII1=== 33
C_cLOR IIII1=== 29
TUnE IIIIhll
_ Press the CH(annel)
A/V buttons to select
SETUP, then press the
VOL(ume) I_ or _1 button
to continue. LANGUAGE
will be selected.
LANGUAGE E
AUTO iNS FALL
HANNEL EDIT
Press the VOL(ume)
I_ or _1 button to select
ENG for English menus or
ESP for Spanish menus.
EXIT N_
LANGUAGE E
A_TO iNSTALLANNEL EDIT
IDIOMA E
AUTOPROGRAMAOON
VISAR CANAL
_ Press the
STATUS/EXIT button,
If you accidentally
chose Spanish and need
English:
1) Press the MENU but-
ton.
2) Press the CH(annel)
h Jr buttons to select
INSTALACION, then
press the VOL(ume) I_
or _1 button to continue.
3) IDIOMA will be select-
ed. Press the VOL(ume)
I_ or _1 button to have
ENG appear beside LAN-
GUAGE.
4) Press the
STATUS/EXIT button,
T_there are two ways to adjust
e TV's volume. Follow
these steps to adjust the volume
using the on-screen menu.
Or, you can adjust the volume
using the VOL(ume) I_/_1 but-
tons on the remote control or
the VOLUME A/_ buttons on
the TV.
to]/_n. Press the MENU but- 1
_ Press the CH(annel)
&/V buttons to select
VOLUME. Then, press the
VOL(ume) I_/_1 buttons to
adjust the volume level.
_SHARPNESS IIIIInI 3i_
TiNT iiiIhll -05
VOLUME IIIIIIII 13
SLEEPTIMER O
_arILock
Press the
TUS/EXIT button to
remove the menu.
The Volume
indicator should appear
on the screen when
you adjust the volume.
The simplest way to
adjust the volume is by
pressing the VOL(ume)
I_/_1 buttons.
ave you ever fallen asleep
n front of the TV, only to
have it wake you up at 2 a.m.
with a test pattern screeching
in your ears? Well, your TV
can save you all that trouble by
automatically turning itself off.
Set the Sleeptimer simply by
pressing the SLEEP button, or
yOU may use the on-screen
menu,
_]_Press the SLEEP button
repeatedly to pick the
amount of time (15 minutes to
120 minutes) before the TV
turns itself off. The length of
time will appear on the screen.
One minute before the TV
shuts itself off, the seconds will
count down on the screen.
f
O
CD(33
G3 EDCD
L_<_ Press the MENU button. ]
<_ Press the CH(annel)
• /V buttons to select SLEEP-
T MEn.
_Press the VOL(ume) 1
I_/_lbuttons repeatedly to set
the amount the time or to
select OFF.
-5-
_Press the STATUS/EXIT
button to remove the menu.
To see how
many minutes remain
before the TV shuts
itself off, press the
SLEEP button once or
press the
STATUS/EXIT button.
To cancel a
SLEEPTIMER setting,
press the SLEEP but-
ton twice so that OFF
appears on the screen.
To Next Page
Loading...
