Magner175V/175FF USER Guide
Magner INT 21
4. Operation Mode 2
4-1. GT - When GT function is on, machine settles accounts before user clears the accounts.
By long pressing “6” key, you can see the result of GT.
When you press “0” key, GT result of each operation mode is shown.
(VALUE -> ATM -> FIT -> Unfit)
After select operation mode, if press “9” key, GT result of the selected mode is printed to Printer.
After select operation mode, if press “8” key, GT result of the selected mode is saved to USB stick.
To Next Page
Loading...
