Need help?Do you have a question about the Magner 30 and is the answer not in the manual?
General| Stacker Capacity | 200 notes |
|---|---|
| Display Type | LCD |
| Power Consumption | 60W |
| Power Supply | AC 100-240V, 50/60Hz |
| Counterfeit Detection | UV, MG, IR |
Identifies key components of the banknote counting machine, including control panel, hopper, and stacker.
Details the functions and buttons of the machine's control panel, including different models.
Explains the function of the Reset/Start button for resetting counts or starting machine operation.
Describes how to set a preset number of notes for the batch function, stopping the machine upon reaching the count.
Details the available machine speeds for counting notes per minute.
Explains how the ADD button displays the accumulated total of notes counted.
Describes the Ultra-violet detection function for checking banknote authenticity.
Explains the Magnetic sensor function to examine the magnetic composition on banknotes.
Details the DD function for detecting notes by height and length differences.
Describes the DEN function for detecting different note sizes by height.
Explains the A/M button for setting automatic or manual start of the counting machine.
Details how to access and configure various machine settings like speed, density, and alarms via the MODE button.
Lists key technical specifications including voltage, power, dimensions, weight, document size, and speed.
Provides instructions for cleaning sensors using soft brushes and avoiding chemicals.
To Next Page
