Magner 30 - Error Codes and Solutions

4. Error Codes
Error Codes Reason Solution
E-db
Two notes have passed Check the Note
E-CH
2 or more notes have passed Check the Note
E-HF
Half size note has passed Check the Note
E-JA
Notes are jammed in the M/C Remove the Note
E-FE
Machine runs but no Notes Check the Hopper
E-HP
Dirt on Hopper Sensor Clean the Sensor
E-St
Dirt on Stacker Sensor Clean the Sensor
E-C1
Dirt on Left Count Sensor
Clean the Sensor
Check the Cable
E-C2
Dirt on Right Count Sensor
E-C3
Dirt on both Count Sensors
E-En
Encoder Sensor Problem Check the Sensor
E-Pr
Note Skew (right side) Count Again
E-PL
Note Skew (Left side) Count Again
E-CF
UV Error Fake Note
E-FC
MG Error Fake Note
E-dd
Different Size Note by Height Remove the Note
E-tE
Short size note has passed Check the Note