2. Function of Control Panel
2-○
1
. RESET / START
This button can be used to reset number of counting result shown on the
display or error messages or to start the machine operation.
2-○
2
BATCH
Expected the BATCH size of note numbers will be selected. When
reaching the BATCH number the machine stops operation.
2-○
3
SPD ( For Simple Counter Only )
It is the SPEED button which has 4 different speeds as shown under..
L-1 : 1,000 notes per minute
L-2 : 1,200 notes per minute
L-3 : 1,300 notes per minute
L-4 : 1,500 notes per minute
2-○
4
ADD
When pressing ADD button the accumulated total of notes will be shown
on the display when they have been counted.
2-○
5
UV ( Counter with UV Only )
The Ultra-violet detection function is capable of checking the authenticity
of the banknote paper by UV light.
To Next Page
Loading...
