2-○
6
MG ( Counter with MG Only )
Magnetic sensor function is to examine the presence of the magnetic
composition on the surface of the banknotes.
When Counting DZD (Algerian Dinars) – MG OFF
When Counting USD (US Dollars) – MG ON
2-○
7
DD ( For Counter with UV & MG Only )
When switching on DD it automatically detects the different size of note
by height detection based on the firstly scanned note size.
However, each of denominations should have more than 6mm difference in
height and length. (30SUMI ONLY FOR LENGTH)
1) Press DD button once (dd-A Ht_) : 3mm Height
2) Press DD button twice (d2-A br_) : 6mm Length
3) Press DD button 3 times (dd-A ALL) : 3mm Height & 6mm Length
4) Press DD button 4 times (OFF) : Function Off
2-○
8
DEN ( For Simple Counter Only )
2-○
9
A/M ( For Simple Counter Only )
When A/M button is on machine will be starting automatically in case the
hopper sensor detects any notes placed. In case of A/M button is off the
machine is running manually whenever RESET/START button is pressed.
To Next Page
Loading...
