MAGNER 910 Operation Manual V1.1
Page 15 of 18
covers the 2
nd
solenoid triggering sensor. Please check and clean this
part, including all connecting wires check. After solving this problem,
press CLR key to come back into main display modes interface.
（4）ERROR 03
CHECK THE SENSOR 3
ERROR:
03
·When it displays such error message, it means there is foreign thing
covers the 3rd solenoid triggering sensor. Please check and clean this
part, including all connecting wires check. After solving this problem,
press CLR key to come back into main display modes interface.
（5）ERROR 04
CHECK THE SENSOR 4
ERROR:
04
·When it displays such error message, it means there is something
wrong with the rail sensor. Please check if any rail place gets
short-circuit, including all connecting wires check. After solving this
problem, press CLR key to come back into main display modes
interface.
（6）ERROR 05
·When it displays such error message, it means there is short circuit
point on the coin outlet drawer full warning sensor. Please check the
coin outlet drawer and sensor connecting wires. After solving this
To Next Page
Loading...
