Magner 910 - Main Display Modes; Operating Procedures

MAGNER 910 Operation Manual V1.1
Page 7 of 18
6. Main Display Modes
1）Total Amount & Quantity Display Mode:
MIX- COUNT STOP
VALUE: 125.90
COUNT: 190
B
F:
2
2）Separate Channel Amount & Quantity Display Mode:
VALUE
COUNT
AMOUNT
2.00
50
100.00
0.50
0.01
50
90
25.00
0.90
7. Operating Procedures
Turn on the machine, the machine will enter into self-test mode and
show following interface
MODEL : CS910S+
VERSION:
MainBoard V1.0
DispBoard V1.0
ADBoard V1.0
TESTING,PLEASE WAIT...
10
This self-test stage may need about 15 seconds for machine to get
warmed up. If the test result is OK, then machine will enter into
normal working status shown as following interface: