10.4.3 Restoring parameters
Parameter restore option is available only if memory card is installed.
Enter code 10. Confirm with ENTER.
Save data,
User models?
Confirm with ENTER.
Transfer from mainboard ■
to memory card. □
Use Up and Down buttons to select the desired menu. Confirm with ENTER.
Save data?
Confirm with ENTER.
Saving
■ ■ ■ ■ ■ ■ ■
The device will switch into standby mode.
It is suggested that the
data is saved on the
memory card periodically.
To Next Page
Loading...