Need help?Do you have a question about the Magneti Marelli Clima-Tech Plus and is the answer not in the manual?
Defines the warranty duration and terms for the equipment.
Outlines the process for warranty repairs and service.
Explains how to initiate and process warranty service requests.
Lists conditions and damages not covered by the warranty.
Describes the primary function and application of the device.
Details the physical components and their arrangement within the device.
Lists key technical parameters and capabilities of the device.
Specifies the electrical power requirements and consumption of the unit.
Provides details on the noise emissions produced by the device during operation.
Details the instruments used for technical measurements and their specifications.
General safety guidelines and precautions for operating the equipment.
Defines key terms and terminology related to refrigerant handling and the device.
Factors influencing the continued usability of refrigerant after system use.
Specific notes and recommendations regarding refrigerant recycling procedures.
General advice and information related to refrigerant handling and system preparation.
Instructions for removing the device from its packaging and checking contents.
Guidelines for storing the device when not in use, including safety aspects.
Steps required to prepare the device for its initial operation.
Lists and explains various error messages the device may display.
Overview of the device's operational modes and capabilities.
Details on how to use the memory card for enhanced functionality.
Explanation of how to navigate and use the device's software interface.
Instructions for editing or inputting data, such as vehicle registration numbers.
How the device identifies and recalls previous service data for vehicles.
Using the database to find and select vehicle models for operation.
Procedure for manually injecting oil and UV additive into the system.
Steps involved in recovering refrigerant from the vehicle's A/C system.
Process of creating a vacuum within the A/C system for preparation.
Procedure for synchronized injection of oil and UV additive.
Steps for manual injection of oil and UV additive.
Instructions for filling the device's internal refrigerant cylinder.
Procedures for diagnosing the vehicle's A/C system and potential failures.
How to change the device's display language.
Procedures for resetting maintenance counters for the device.
Information regarding environmentally responsible disposal of the product.
General| Brand | Magneti Marelli |
|---|---|
| Model | Clima-Tech Plus |
| Category | Welding System |
| Language | English |
To Next Page