Magneti Marelli Clima-Tech Plus - 8.2 Automatic program (without memory card)

Connect HP/LP ■
HP LP □
Select using UP-DOWN buttons. Confirm by pressing ENTER. See chapter:
 Automatic program (without memory card),
 Automatic program (with a memory card),
 User program.
8.2 Automatic program (without memory card),
When entering the program selection mode (see 9 PROGRAMS) the following menu
appears:
Auto Progr. ■
User progr. □
Select using UP-DOWN buttons.
Confirm by pressing ENTER.
Specify refrigerant weight ■
User vehicles □
Select using UP-DOWN buttons.
Confirm by pressing ENTER.
Specify refrigerant weight
Refrig. g XXXX
Specify the correct refrigerant weight using UP-DOWN buttons.
Confirm by pressing ENTER.
Refrigerant qty g: XXXXX
Vacuum: XX:XX
Vacuum generation time is calculated based on the refrigerant quantity specified.
Use UP-DOWN buttons to select the oil/UV injection program.
See 9.5 Programming oil/UV injection phase.
Confirm by pressing ENTER to start the automatic program with manual oil/UV injection.