Need help?Do you have a question about the Magnetrol C15 and is the answer not in the manual?
General| Process Temperature | -40 to +392°F (-40 to +200°C) |
|---|---|
| Process Pressure | Up to 1000 psi (69 bar) |
| Enclosure Rating | NEMA 4X (IP66) |
| Process Connection | Flanged |
| Material | 316 Stainless Steel |
Explains the basic buoyancy principle of displacer operation.
Describes the sequence of events during level changes.
Guidance on physically installing the switch in the tank.
Procedures for connecting the electrical wiring to the switch.
Guidelines for routine care and upkeep of the control.
Lists actions that can damage the control or cause malfunction.
Steps to diagnose and resolve operational problems with the control.
Dimensions and switch actuation points for A10 models.
To Next Page
