3
Maguire Weigh Scale Blender
This document is the Original Instructions manual of the Maguire Weigh Scale Blender models WSB-
MB, WSB-100 Series, WSB-200 Series, WSB-400 Series, WSB-900 Series, WSB-1800 Series,
WSB-2400 Series and WSB-3000 Series equipped with the 4088 Touchscreen controller.
Copyright 2020 Maguire Products Inc.
The information contained within this manual including any translations thereof, is the property of
Maguire Products Inc. and may not be reproduced, or transmitted in any form or by any means
without the express written consent of Maguire Products Inc.
To every person concerned with use and maintenance of the Maguire WSB
it is recommended to
read thoroughly these operating instructions. Maguire Products Inc. accepts no responsibility or
liability for damage or malfunction of the equipment arising from non-observance of these operating
instructions.
To avoid errors and to ensure trouble-free operation, it is essential that these operating instructions
are read and understood by all personnel who are to use the equipment.
Should you have problems or difficulties with the equipment, please contact Maguire Products Inc. or
your local Maguire distributor.
Manufacturer’s Contact Information
Maguire Products Inc.
11 Crozerville Road
Aston, PA. 19014
Phone: 610.459.4300
Fax: 610.459.2700
Website: http://www.maguire.com
Email: info@maguire.com
To Next Page
Loading...
Need help?
General