To Next PageTo Next Page
Need help?Do you have a question about the MAHA MBT Series and is the answer not in the manual?
General| Type | Brake Tester |
|---|---|
| Application | Vehicle brake testing |
| Frequency Range | 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Display | LCD touchscreen |
| Communication Interface | USB |
Outlines critical safety procedures and precautions to be followed during the operation of the brake tester.
Defines the hazardous area around the roller set and specifies the exclusion zone during operation.
Provides essential safety guidelines for personnel performing maintenance and repair work on the equipment.
Specifies the authorized application and limitations of the brake testing equipment.
Details essential safety measures for the correct installation and initial setup of the equipment.
Explains testing procedures for 4-wheel drive vehicles, including operational principles and setup.
Describes the buttons and operational functions of the remote control unit used with the tester.
Details the automatic procedure for recognizing and testing vehicles equipped with 4-wheel drive systems.
Details the "Reco 1" test procedure specifically adapted for vehicles with 4-wheel drive capabilities.
Details the "IFB Mode" test procedure for vehicles equipped with 4-wheel drive systems.
Lists common error codes displayed by the equipment and provides recommended remedies or troubleshooting steps.
