Mahindra 35 Series User Manual

E-28
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
4. Remove inner circlip (C) of inner bearing (D) and
take out inner bearing.
5. Loosen bolt (E) of retainer bearing (F) and take
out retainer by slight tapping.
6. Remove outer bearing (G) of Rear Axle.
NOTE: Check ball bearing and oil seal for damages
and pitting, if require replace it.
4. Cleaning and Inspection
1. Clean all parts with suitable solvent.
2. Inspect bearing for wear, pitting or damage.
3. Inspect gear for worn, chipped or broken teeth.
Check splines for burrs and correct fitting.
4. Check bull pinion shaft for damage, pitting and
burrs and backlash.
5. Check Ball Bearings and oil seals for damages and
pitting, if require replace it.
Rear Axle

Mahindra 35 Series Specifications

General

Cylinders	3
Transmission	8 Forward + 2 Reverse
Fuel Type	Diesel
Brake Type	Oil Immersed
Brakes	Oil Immersed
Steering	Power Steering
Drive Type	2WD
Engine Type	Diesel
Steering Type	Power
Fuel Tank Capacity	45 liters