Mahindra 35 Series User Manual

F-18
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
Front Axle
E. PINION GROUP ASSEMBLY
1. Insert bearing (A) on spiral bevel pinion (B).
NOTE: Temperature of bearing 120ºC
2. Place the housing input shaft (C) on a flat
surface.
3. Press the outer cone of bearing to both side of
housing input shaft.
4. Put shims (D) and spacer (E) on pinion.
5. Insert housing input shaft to the pinion.

Mahindra 35 Series Specifications

General

Cylinders	3
Transmission	8 Forward + 2 Reverse
Fuel Type	Diesel
Brake Type	Oil Immersed
Brakes	Oil Immersed
Steering	Power Steering
Drive Type	2WD
Engine Type	Diesel
Steering Type	Power
Fuel Tank Capacity	45 liters