Mahindra 35 Series User Manual

F-23
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
Front Axle
G. ASSEMBLY OF SIDE HOUSING TO BEAM
HOUSING AND DIFFERENTIAL CARRIER
1. Clean beam housing and apply loctite on
differential carrier resting surface.
2. Mount differential carrier assembly to the beam
housing and tighten bolts (A) to 120 Nm torque.
3. Put o’ring (B) on beam housing both ends.
NOTE: Apply grease to o’ring before fitment.
4. Insert shaft beam housing (C) in differential.
5. Put spacer (D) to beam housing both end side.
(Not Applicable for 29 PTO).
NOTE: This spacer is not applicable for
29 PTO tractors.
6. Fit side housing to beam housing with the help
of suitable hoist.

Mahindra 35 Series Specifications

General

Cylinders	3
Transmission	8 Forward + 2 Reverse
Fuel Type	Diesel
Brake Type	Oil Immersed
Brakes	Oil Immersed
Steering	Power Steering
Drive Type	2WD
Engine Type	Diesel
Steering Type	Power
Fuel Tank Capacity	45 liters