MAHLE MCX-2 - Page 17

16
CHANGING COOLANT TYPE
CHANGING COOLANT TYPECHANGING COOLANT TYPE
CHANGING COOLANT TYPE
10. Press the top of the EXCHANGE COOLANT OR FILL RADIATOR & OVERFLOW selector
switch to start the pump.
11. Insert the end of the Wand in the fill port of the New Coolant Tank. Open the valve on the
Wand.
12. The pump will prime and hoses will fill with the new coolant.
13. Close the valve on the Wand when new coolant starts flowing.
14. Press the bottom of the EXCHANGE COOLANT OR FILL RADIATOR & OVERFLOW selector
switch to turn off the pump.
15. Place the cap on the New Coolant Tank and slide it into the MCX-2F.
Black Hose
LOWER RADIAT OR
EMPTY WAST E TANK
& OVERFLO W
SYSTEM PRES SURE
SYSTEM VACUUM
LOWER RADIAT OR
& OVERFLO W
TEST
EXCHANGE C OOLANT OR
EMPTY WAST E TANK
EXCHANGE C OOLANT
& OVERFLO W
FILL RADIATOR
OFF
OFF
FILL RADIATOR & OVERFLO W
OFF
LOWER RADIATOR
& OVERFLOW
EMPTY W ASTE TANK
SYSTEM VACUUM
FILL RADIATOR & OVERFLOW
OFF
OFF
FILL RADIATOR
& OVERFLOW
EXCHANGE COOLANT
TEST
SYSTEM PRESSURE
EMPTY W ASTE TANK
EXCHANGE COOLANT OR
OFF
& OVERFLOW
LOWER RADIATOR
Green Hose
Green Hose
Wand
(Small)
New Coolant Tank