1. Scope of delivery
The final mounting of the ER EC
unit, together with the ER A.. cover,
takes place after the shell phase.
Pre-requirements: The ER GH
recessed-mounted housing must be
installed according to the relevant
ER shell mounting instructions.
Please carefully read the “ER cover”
instructions before the final
mounting of the ER cover.
For filter changes and cleaning
chapter 13.1.
Follow the instructions. Pass these
instructions on to the owner for
safekeeping.
Scope of delivery
Depending on the order:
● ER-A (article no. 0084.0361):
Standard cover: Lower part of cover and
upp
er part of cover, central screw, air filter
and TimeStrip on the title page of thes
e
i
nstructions, these mounting and operati
ng
i
nstructions.
● ER-AK (article no. 0084.0362):
Comfort cover: Lower part of cover
and
upp
er part of cover, central screw, air filter,
these mounting and operating instructions.
● ER-AH (article no. 0084.0363):
Cover with humidity control.
Lower part of cover and upper part of
cover, central screw, air filter, thes
e
mounting and operating instructions.
● ER-AB (article no. 0084.0364):
Cover with motion detector.
Lower part of cover and upper part of
cover, central screw, air filter, thes
e
m
ounting and operating instructions.
chapter 16 with more detailed
information and order numbers.
Specialist installer
qualifications
Mounting may only be carried out by
specialists who have the necessary
knowledge and experience in ventilation
engineering. The unit must be connected in
accordance with the “General building
approval”.
Only a trained electrician is permitted to
work on the electrics. You are deemed a
trained electrician if you are familiar with the
relevant standards and guidelines, can
competently and safely create electrical
connections in line with the attached wiring
diagram and are able to recognise and avoid
risks and dangers associated with electricity
on the basis of your technical training and
experience.
Intended use
These fans are used to extract air from
interior bathrooms and toilets rooms, storage
rooms or open plan kitchens (with outside
windows), for example in multi-storey
residential buildings, office buildings or hotel
complexes.
The fans are installed in a wall, a front wall or
a suspended ceiling and are connected to a
ventilation shaft. They can also be used as
individual units in the wall or ceiling or for
toilet seat air extraction.
These fans are only intended for domestic
use and similar purposes.
To Next Page
Loading...
Need help?
General