Operating Instructions MA 41
8100456_OI_MA41_EN_15a 40 8100456-8 04/15
11 Connection to the PC
Install the included software on your PC. The driver for the device will be
installed automatically. Connect the MA 41 by USB cable to the PC and turn on
the device. The required driver will be installed. Please follow the installation
procedure. When the installation program asks you how to search for software,
choose “Yes, this time only” and click on the Next button.
Figure 17 - Installation Advice
Select automatic installation in the next dialog window and click the Next
button. Wait till the MAICO MA 4x family driver is installed and the operating
system updated. Click on the Finish button when the installation of the driver
is completed. The new hardware is now ready to use.
Figure 18 - Software Installation
To Next Page
Loading...
Need help?
General
