To Next PageTo Next Page
Need help?Do you have a question about the Majestic 300DVBNSC7 and is the answer not in the manual?
Details symptoms of carbon monoxide poisoning and steps to take if a gas leak is detected.
Covers safe installation, servicing, operation, and potential hazards like high temperatures.
Outlines compliance with safety codes, CSA, ANSI, and manufactured home standards.
Lists general features, approvals for installation types, and gas compatibility.
Details input ratings at high elevations and required gas pressure ranges.
Lists items required for installation and pre-start checks.
Provides detailed measurements for the fireplace and required framing.
Guides on preparing the fireplace structure and choosing its placement.
Advises on sealing and insulating the appliance in cold weather conditions.
Details required distances from combustible materials around the fireplace.
Specifies required distances for mantel installations above the fireplace.
Instructions on how to securely attach the fireplace unit to the floor or framing.
Guidelines for using noncombustible materials for finishing the fireplace surround.
Step-by-step guide for converting the appliance from rear vent to top vent.
Safety and warranty considerations for venting installation.
Explains venting methods, clearances, and component usage.
Specifies required clearances and conditions for vent termination.
Details required clearances for vent termination in various scenarios for Canadian and US.
Further details on termination clearances and alcove applications.
Instructions for connecting vent pipes, including flex vent usage.
Guide to joining twist lock vent pipes securely.
Instructions on how to interpret the graph for side wall venting layouts.
Specifies minimum clearances to combustibles for horizontal and vertical vent pipes.
Details for rear wall venting, including clearances and maximum distances.
Steps for installing rear wall vents using twist lock pipes.
Instructions for rear wall venting using flexible vent pipe.
Guidelines for top venting through a sidewall, including restrictor installation.
Details on the number and type of elbows allowed in the venting system.
Explains how elbows affect horizontal vent run length and total system degrees.
Steps for installing vertical sidewall vents using twist lock pipes.
Instructions for vertical sidewall venting using flexible vent pipe.
Guidance for installations below grade, including snorkel use and clearances.
Requirements and limitations for venting through the roof.
Details on preparing the roof opening, installing firestops, and supports.
Covers installation of venting supports, roof flashing, and storm collars.
Ensures the correct gas type is used for installation.
Instructions for connecting the gas supply, including propane/LP requirements.
Details on connecting gas lines, shutoff valves, and sediment traps.
Procedure for checking gas pressure at the millivolt valve.
General guidelines for electrical connections, grounding, and safety.
Instructions for wiring a remote wall switch, including wire gauge.
Wiring instructions for the BLOT blower system, including junction box connection.
Crucial safety checks and actions before igniting the millivolt appliance.
Procedures for initial pilot lighting and verifying gas connections for leaks.
Lists acceptable methods for checking gas leaks.
Step-by-step guide for igniting the pilot light on the millivolt system.
Instructions for igniting the main burner after the pilot is lit.
Procedures for safely shutting off the gas supply to the appliance.
Procedure for checking gas pressure at the Signature Command valve.
Overview of system operation, power, and optional accessories.
Details on wiring the junction box, command center, and wall switch.
Instructions for installing the wall switch and connecting it to the system.
Detailed wiring diagram for the Signature Command system.
Wiring instructions for the BLOTSC Blower Kit.
Wiring instructions for the BLOT Automatic Thermostat Blower.
Wiring instructions for the FK-12 Manual Blower.
Critical safety checks and actions before igniting the Signature Command system.
Step-by-step guide to operate the Signature Command system.
Procedure to safely shut off the gas supply to the appliance.
Details of Command Center, Control Board, AC Module, and Transmitter features.
Instructions for installing backup batteries for the Command Center.
Guide to configuring system settings like pilot type and shutdown.
Procedure for pairing the remote transmitter with the system.
Details on turning the unit on, off, and adjusting flame height.
Explains LED indicators for troubleshooting system faults.
Step-by-step instructions to remove the glass frame safely.
Instructions for placing rock wool and logs for optimal flame appearance.
Guidance on using lava rock and optional embers in the combustion chamber.
How to clean internal components like the burner, pilot, and control compartment.
Guidance on checking pilot and burner flames for proper operation.
Maintenance for the vent system and cleaning the fireplace glass door.
Care instructions for ceramic fiber logs and rock wool.
Addresses issues with the spark ignitor, pilot light, and gas pressure.
Solutions for frequent pilot outages and burner extinction.
Addresses issues like glass sooting and blue flames (ghosting).
Guides users through diagnosing and resolving system faults with step-by-step actions.
Visual guide to identify different firebox components.
Table listing replacement parts for each fireplace model.
Visual guide to identify parts of the millivolt control system.
Table listing replacement parts for the millivolt control.
Information on kits to convert between natural gas and LP.
Visual guide to identify parts of the Signature Command system.
Table listing replacement parts for the Signature Command system.
Information on conversion kits for the Signature Command system.
Table listing replacement log sets for each fireplace model.
List of parts and kits for vertical venting systems.
List of parts and kits for horizontal venting systems.
State regulations for installing vented gas appliances, including CO detectors.
Mandates for CO detectors, vent signage, and inspection for Massachusetts installations.
Details on warranty periods, coverage, exclusions, and limitations.
Instructions on how to obtain warranty service and contact information.
Table showing fireplace energy efficiency percentages.
General| Brand | Majestic |
|---|---|
| Model | 300DVBNSC7 |
| Category | Indoor Fireplace |
| Language | English |
