Major MR150 - Sticker Numbers and Locations; Key to Safety Devices

6
STICKER NUMBERS & LOCATIONS
KEY TO SAFETY DEVICES
1. PTO shaft guard.
A cowling where the driveline couples with the
shredder over-drive protects the rotating end
of the driveline itself.
2. Drive belt guard.
Prevents access to the drive belts and
pulleys.
3. Snap Pin.
Prevents the wheel with the fork slipping off
accidentally.
4 Driveline shield.
The driveline is supplied with adequate plastic
shields and relative fixing chains.
5. Guards (only on the rear discharge
version)
Prevents the product leaking out of the side of
the machine
6. Rear Guards
Prevent any solid objects there may be in the
earth from being ejected great distances.
7. Safety Pin
Prevents the pin in the attachment point 3
slipping out accidentally. Fig. 3.5
1
2
3
5
6
Fig.
3.5
4
MR150 &
MR180 only