EN
6
SETTING UP YOUR MAJORITY ATLAS
Please note that the instructions in this manual will refer to the soundbar button
number e.g (Ref.*number*) in accordance with the diagrams on pages 2-3.
Connecting and powering the unit
Using the USB to Mini USB power cord provided, plug the mini USB connector into the
back of the unit (Ref.8) and plug the other end into a USB power supply (mains adaptor
or other USB power supply).
Switch on your Majority Atlas Soundbar
Switch the unit on by rotating the On/Off/Volume dial clockwise until the dial clicks
into place and the soundbar is powered on (Ref.6). To switch the unit off, rotate the
dial (Ref.6) anti-clockwise until the dial will not rotate any further.
Basic operations
Use the On/Off/Volume dial (Ref.6) to switch the unit on or off and change the volume.
In Bluetooth, SD, or USB mode, use the ⏯ button to play or pause a track, and use the
⏮ ⏭ (Ref.2)/(Ref.4) buttons to skip tracks or fast forward/rewind (press and hold to
rewind or fast forward) (see page 5).
Press the ‘MODE’ button (Ref.5) to change modes between SD card, Bluetooth, AUX
and USB mode.
To Next Page
Loading...
Need help?
General
