10
Instrucons Guide
Press the ‘Standby/Mode’ button (Ref.) to switch on from
standby.
Follow by pressing the ‘Standby/Mode’ button (Ref.) to
switch to FM mode. The rst time you go on FM mode, the FM
frequency “87.5 MHz” will be displayed on the screen.
To auto scan to the next available station, press and hold the
‘Previous’ button (Ref.) and then release.
After searching has nished the unit will automatically play the
rst station stored with a good signal.
How to tune a specic frequency manually
To listen to a specic frequency, you can search quickly by
pressing and holding the ‘Next’ button (Ref.) to search up and
‘Prev’ button (Ref.) to search down the bandwidth. It will stop
searching when you press the button again.
To search slowly, press the ‘Next’ (Ref.) and ‘Prev’ (Ref.) button
multiple times instead of holding.
FM Radio
To Next Page
Loading...
Need help?
General
