Check whether the power is switched on or off
at the wall.
Check that the power adaptor is properly
connected to the power outlet.
Check whether unit is set to MUTE.
Check whether MODE is correctly selected.
Turn up the volume on the speakers or on your
external device.
Check that cables are properly installed.
Switch off and unplug the unit. Leave it for 2
minutes and switch it on again.
Ensure that you are on Bluetooth mode on the
speaker and the Bluetooth on your device is
switched on. Select the Bluetooth device ‘D40’
and you should now be able to play audio.
SUPPORT
If you require further assistance with your new soundbar, please contact our support
team on the Majority website:
www.majority.co.uk/support
To Next Page
Loading...
