8
EN
Connecting to the mains socket
Unwind the mains cable to its full length. Connect the mains plug to the mains socket. The unit is now
connected and ready to use
Be sure to connect the power cord to an AC outlet that supplies the correct voltage.
Hold the power plug when plugging it into an outlet or unplugging it. Never pull or yank on
the power cord.
To switch the unit o completely, unplug the mains cable from the mains socket.
Network Connection
This product only supports wireless network connection for network access and does not support
wired LAN connection.
Wireless Network
1. To begin with, check the control lamps (LINK/ACT), of your router light up.
2. To connect with your wireless network, proceed with the operations described under section’
Getting Started’.
It is recommended running through the setup wizard in the System Settings section.
This unit cannot be connected to a standalone modem directly. A router, or a modem
connected to a router has to be used.
Note: Please follow the instructions/specications of your internet service provider,
telecommunication carrier and router user manual.
Instructions Guide
To Next Page
Loading...
