To Next Page

To Previous Page

IMPORTANT

Dual Alarm Setting

.Alarm1 Setting/ Alarm2 Setting

• Ensure the radio is in standby mode.

• Press and hold ‘VOL-/AL1’ or ‘VOL+/AL2’ buttons (Ref.4) to set ALARM1/2.

• To change the minutes use the ‘TU+/DIM+’ button (Ref.5) to change the minutes.

• Then to change the hour use the ‘TU-/DIM-’ button (Ref.5) to change the hour.

• Press the ‘VOL-/AL1’ or ‘VOL+/AL2’ buttons (Ref.4) depending on which alarm you are setting, you the can scroll through the alarm

sounding options by using the ‘TU+/DIM+’ button (Ref.5). When on your required option ”BUZZER,RADIO or iPod” press the ‘VOL-

/AL1’ or ‘VOL+/AL2’ button (Ref.4) depending on which alarm you are setting.

• You can choose your volume levels by using the ‘TU+/DIM+’ button (Ref.5) to tab through which volume level you want. To

confirm, press the ‘VOL-/AL1’ or ‘VOL+/AL2’ button (Ref.4) depending on which alarm you are setting.

• The display will show “AL1/AL2” once the alarm has been set.

MAJORITY MERCURY User Manual

Questions and Answers: