EasyManua.ls Logo

MAK M 20 - Working on Electrical Equipment

MAK M 20
350 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
A5.02
M20/M25/M32/M43
en / 14.12.2010 AA047605 12/15
3.3 Working on electrical equipment
CAUTION
Work on the electrical equipment of the engine/plant must be carried out only
by a skilled electrician or by instructed persons under the supervision and
guidance of a skilled electrician in accordance with the electrical engineering
rules and regulations!
Use only original fuses with the specified current raiting! Switch off the engi-
ne/plant immediately if trouble occurs in the electrical system!
The electrical equipment is to be inspected/checked at regular intervals.
Defects such as loose connections or scorched cables must be rectified imme-
diately!
DANGER
Engine or plant parts on which inspection and maintenance work is being car-
ried out have to be - if prescribed - shut off at the power supply and provided
with the notice “Do not switch on” or the corresponding warning sign!

Related product manuals