18
Tips and Tricks
- Patch Strength out to Activation CV In to "ring modulate" any audio source
- Patch CV1 Output to Activation CV In to control the loudness of the Strega Tones using an external
instrument patched to External Substance In. With External Constant Control turned down you can
also use this to dial in the correct Strength setting for your instrument (watch the brightness of the
CV1 LED and listen to the depth of Activation modulation).
- Patch a dummy cable to Agitation Start/Stop in order to Stop the Agitation circuit from cycling.
- Use the Activation Touch Gateway with various Touch Bridges to "play" Strega by hand even without
an external controller.
- Patch a dummy cable to External Input with Strength at 9:00 or greater, and generate human sound
by touch by touching the other end of the cable. While touching the cable, any Touch Bridge you
touch will also be injected into the Strega experiment. (Thanks Jon King for this observation)
To Next Page
Loading...