6
Connecting Power
It is recommended that the Strega AC Adapter is plugged into a fuse-protected power strip with an On/Off
switch; however, if that is not available, it is OK to plug it into a wall outlet. Use only the Make Noise Strega
AC Adapter to power the Strega. To turn on your Strega, once you have plugged the AC Adapter into your
AC outlet, attach the other end of the AC Adapter to the jack on the side of the Strega.
The included Y cable may be used to allow a single Strega power supply to power a Strega as well as a 0-
CTRL or 0-Coast.
To Next Page
Loading...