Need help?Do you have a question about the Makita 5620D and is the answer not in the manual?
General| Brand | Makita |
|---|---|
| Model | 5620D |
| Category | Power Tool |
| Language | English |
Guidelines for maintaining a clean and safe work environment to prevent accidents.
Precautions for using battery-operated tools safely and preventing electrical hazards.
Essential personal safety measures to avoid injury during tool operation.
Best practices for using, maintaining, and storing the tool safely and effectively.
Instructions for tool servicing and professional repair to ensure safety and performance.
Crucial safety advice on keeping hands clear of the blade and maintaining proper body position.
Ensuring the lower guard functions correctly for blade protection and safe operation.
Proper use of the lower guard, especially for special cuts, to prevent accidents.
Guidelines for securely supporting workpieces to prevent kickback and loss of control.
Safety measures when cutting near potential hidden electrical wiring.
Understanding kickback causes and implementing precautions to avoid it.
Using correct blades and keeping them sharp and clean for safety and performance.
Importance of securing depth and bevel settings to prevent binding and kickback.
Techniques for safe cutting, including speed, handling damp wood, and avoiding nails.
Proper methods for supporting workpieces, especially short pieces, to prevent injury.
Awareness of blade coasting after switch release and precautions.
Caution regarding toxic materials and dust inhalation.
Critical safety instructions for handling Makita battery cartridges and chargers.
Precautions for preventing battery damage, overheating, and fire hazards.
Tips for charging and maintaining battery cartridges to extend their lifespan.
Step-by-step guide for correctly installing and removing the battery cartridge.
How to adjust the cutting depth for optimal safety and performance.
Procedure for setting and securing the bevel angle for angled cuts.
Using base markings to align cuts accurately for straight and angled cuts.
Operation of the switch trigger and lock-off button for safe tool activation.
Understanding the electric brake and its importance, plus service recommendations.
Instructions for safely removing and installing the saw blade using the correct tools.
Guidance on properly storing the hex wrench to prevent loss.
Proper methods for moving the saw forward, maintaining cut lines, and handling errors.
How to use the rip fence for accurate straight cuts and uniform widths.
Steps to adjust the saw for accurate 90-degree vertical cuts.
Procedure for inspecting and replacing worn carbon brushes for tool performance.
List of recommended accessories and attachments for the tool, with usage cautions.
Information on how to properly recycle Makita batteries according to regulations.
Terms and conditions of the Makita limited one-year warranty for tools.
To Next Page
