Why does my Makita Ultrasonic Jewelry Cleaner have weak suction power?
The weak suction power in your Makita Ultrasonic Jewelry Cleaner may be due to several reasons: * The capsule might be full of dust, in which case you should empty it. * The filter could be clogged; try cleaning or washing it. * The battery cartridge may be exhausted. If so, charge the battery cartridge.
General| Voltage | 12V max |
|---|---|
| Battery Type | Li-Ion |
| Weight | 1.0 kg (2.2 lbs) with battery |
| Max Air Pressure | 0.8 MPa |
| Dimensions | 235 x 74 x 173 mm |
| Air Discharge Amount | 10 L/min |
| Hose Length | 650 mm |
General safety precautions and warnings for operating the cordless cleaner.
Key rules for safe operation, handling, and maintenance of the appliance.
Lists materials that must not be suctioned to avoid damage or safety hazards.
Crucial guidelines for safe charging, storage, and use of battery cartridges.
Guidance on installing the normal filter and prefilter.
Illustrates common errors in filter and prefilter loading for troubleshooting.
Identifies issues with prefilter and high performance filter securing for troubleshooting.
Diagnosing and fixing issues related to weak suction power.
Diagnosing and fixing issues when the cleaner is not operating.
To Next Page
