Need help?Do you have a question about the Makita M8701 and is the answer not in the manual?
General| Impact rate | 4500 bpm |
|---|---|
| Rated speed (max) | 1200 RPM |
| Impact energy (max) | 2.3 J |
| Sound pressure level | 90 dB |
| Sound level uncertainty | 3 dB |
| Drilling diameter in wood (max) | 32 mm |
| Drilling diameter in steel (max) | 13 mm |
| Vibration level (metal drilling) | 2.5 m/s² |
| Vibration level (hammer drilling) | 16.5 m/s² |
| Cord length | 4 m |
| Input power | 800 W |
| Power source | AC |
| AC input voltage | 230 V |
| Chuck type | SDS Plus |
| Product color | Black, Orange |
| Adjustable speed | Yes |
| Uncertainty coefficient (metal) | 1.5 m/s² |
Weight and Dimensions| Depth | 362 mm |
|---|---|
| Width | 71 mm |
| Height | 194 mm |
| Weight | 2700 g |
Essential safety guidelines applicable to all power tool operations.
Precautions for maintaining a safe and clear environment during use.
Guidelines to prevent electric shock hazards during operation.
Recommendations for operator protection and safe practices.
How to operate the trigger switch for starting, stopping, and speed control.
Guidance on using the switch to change the direction of rotation.
Mode for drilling into concrete, masonry, and similar materials.
Mode for chipping, scaling, or demolition tasks.
Mode for drilling in wood, metal, or plastic materials.
Safe procedures for hammer drilling, especially during breakthrough.
Techniques for drilling efficiently and safely in wood and metal.
To Next Page
