To Next PageTo Next Page
Need help?Do you have a question about the Makita BGA452 and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Voltage | 18V |
| Disc Diameter | 115 mm |
| No Load Speed | 10, 000 rpm |
| Battery Type | Li-ion |
| Spindle Thread | M14 |
| Length | 286 mm |
Maintain a clean, well-lit workspace and keep bystanders away.
Use specified chargers and battery packs; avoid fire risks.
Stay alert, dress properly, avoid accidental starts, and maintain balance.
Secure workpiece, use correct tool, do not force, and maintain tools.
Guidance on charging and handling battery cartridges to ensure longevity.
Explanation of the tool's features and operation.
Step-by-step instructions for safely inserting and removing the battery pack.
Explanation of the multi-function indicator lamp for tool status.
How the tool protects itself and the motor from excessive load.
Indicator for low battery capacity, signaling the need for a recharge.
Safety feature preventing unintentional tool startup.
Procedure for securely attaching the auxiliary side handle for better control.
Instructions for fitting and removing the protective wheel guard.
Steps to install and remove grinding wheels and multi-discs.
Guidance on mounting and dismounting diamond wheels, including guard.
Procedure for installing and removing flex wheels, ensuring proper alignment.
Steps for mounting and dismounting abrasive discs, including the rubber pad.
Techniques for effective grinding and sanding, including angle and break-in.
Specific instructions for using diamond wheels, avoiding jamming and excessive pressure.
Proper usage of wire cup brushes, including no-load checks and pressure.
Safety and operational tips for wire wheel brushes, including guard usage.
Guidelines for using cut-off wheels, emphasizing specific guards and avoiding side grinding.
