To Next PageTo Next PageWhy does my Makita DCS6401 have insufficient power?
If your Makita Chainsaw is not providing sufficient power, consider these potential causes and solutions: 1. Clean or replace the air filter. 2. Adjust the carburetor. 3. Clear the muffler and exhaust channels. 4. Clean the spark arrester screen.
Why is there no chain lubrication on my Makita DCS6401 Chainsaw?
If there is no chain lubrication on your Makita Chainsaw, it could be due to a few reasons: * The oil tank might be empty, so refill it. * The oil guide groove might be dirty, so clean it. * The oil pump adjusting screw might be incorrectly adjusted, so adjust it.
General| Engine Displacement | 64 cc |
|---|---|
| Weight | 6.3 kg |
| Chain Pitch | 3/8" |
| Fuel Capacity | 0.75 L |
| Oil Capacity | 0.42 L |
Essential safety rules, including kickback avoidance.
Covers operator health, physical condition, and hazard awareness.
Procedures for fueling and starting the chain saw engine.
Detailed explanation of reactive forces during cutting.
Practical steps to prevent dangerous kickback situations.
Instructions and safety for cutting down trees.
Guidelines for cutting logs and removing branches.
Routine maintenance and proper storage of the chain saw.
Labels and descriptions of all chain saw parts.
Step-by-step guide to attach the guide bar and chain.
How to engage, release, and test the chain brake.
Fuel ratios, storage, and safety precautions.
Detailed steps for starting the chain saw engine.
Steps for adjusting the carburetor for optimal performance.
Instructions and techniques for sharpening the saw chain.
Guide to removing and installing a new saw chain.
Procedures for cleaning fleece and nylon air filters.
Replacing spark plug and checking ignition spark.
A schedule of maintenance tasks and their required frequency.
Table identifying common problems and their causes.
