P
phillipscassandraSep 4, 2025
Why does my Makita Vacuum Cleaner start moving suddenly?
- GgonzalezkathleenSep 4, 2025
The ON timer reservation might be enabled, causing the robotic cleaner to start moving suddenly.
To Next PageTo Next PageWhy does my Makita Vacuum Cleaner start moving suddenly?
The ON timer reservation might be enabled, causing the robotic cleaner to start moving suddenly.
Why does my Makita DRC300 Vacuum Cleaner remote not work?
If the remote control for your Makita Vacuum Cleaner isn't working, first check that the batteries are correctly placed. If the cleaner sometimes doesn't respond, replace the batteries with new ones. Ensure the cleaner's power is on by pressing the start/stop button. Also, make sure the distance between the remote and cleaner isn't too far, and there are no obstructions.
What to do if the remote control of my Makita DRC300 Vacuum Cleaner does not work?
If the remote control for your Makita Vacuum Cleaner isn't working, first check if the batteries are correctly placed. If the batteries are old, replace them with new ones. Make sure the robotic cleaner is powered on. Also, ensure that there isn't too much distance or any obstacles between the remote control and the cleaner.
Why does my Makita Vacuum Cleaner keep avoiding even when there's nothing there?
If your Makita Vacuum Cleaner is constantly performing avoidance maneuvers even when there are no obstacles, the cliff sensors or LiDAR sensor may be dirty. Clean them.
What to do if my Makita Vacuum Cleaner fails to avoid a step and falls?
If the robotic cleaner fails to avoid a step and falls, the cliff sensors might be dirty. Ensure that you care for them.
Why does the time reset on my Makita Vacuum Cleaner?
If the set time on your Makita Vacuum Cleaner is frequently reset, the built-in battery may be low from not being used for a long time. Run the cleaner for more than 1 hour, or leave it in standby to recharge the battery.
Why does my Makita DRC300 stop when running?
Your Makita Vacuum Cleaner might stop running due to several reasons: * The robotic cleaner may be caught in a cord or other object, or a cloth or string may be entangled around the wheels. Turn off the power and remove any obstructions. * The robotic cleaner may have stopped without climbing over a step. Turn off the power and relocate the robotic cleaner. * The OFF timer might be set up. * Obstacles with a height of 25 cm or more around the robotic cleaner may be detected by the LiDAR sensor. Place some obstacles taller than 25 cm in the area.
Why is the driving sound louder than usual on my Makita DRC300 Vacuum Cleaner?
The driving sound may be louder than usual because: * The dust box is filled with dust or the filter is clogged. Dispose of the dust and care for the filter. * Dust is caught in the main brush and the side brushes. Care for them and check for proper installation of the brushes.
What to do if my Makita DRC300 Vacuum Cleaner exhausts air that smells?
If the exhausted air from your Makita Vacuum Cleaner smells, it could be due to wet or smelly garbage being sucked in. Discard the garbage. Also, the filter might be clogged, so clean the filter. If you wash the filter with water, make sure to dry it sufficiently before using it again.
Why does my Makita DRC300 not run?
If your Makita Vacuum Cleaner is not running, it could be due to the following reasons: * The error lamp might be blinking. The cleaner will not run during an error. * The cleaner might be in the waiting mode for operation by ON timer reservation. Operations other than turning off the power and location notification are not possible in this mode.
General| Brand | Makita |
|---|---|
| Model | DRC300 |
| Category | Vacuum Cleaner |
| Language | English |
