Makita DSL801TUX2 - Page 12

12 ENGLISH
1. Wear the belt for the extension handle as shown in
thegure.
1
►1. Belt
2. Attach the holder to the belt.
1
2
►1. Holder 2. Belt
3. Put the end of the extension handle into the holder
to support the tool.
1
2
►1. End of extension handle 2. Holder
Operatethetoolinthesamewayasthetoolwithoutthe
extension handle.
You can also operate the tool without using the belt and
theholderasshowninthegure.