Need help?Do you have a question about the Makita DTD156 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 155 Nm |
| No Load Speed | 0-2, 500 RPM |
| Impacts Per Minute | 0-3, 000 IPM |
| Driving Shank | 1/4" Hex |
| Battery Type | Lithium-Ion |
Details the measured sound and vibration emission levels according to EN62841-2-2 standards.
Provides overarching safety advice for operating power tools, including reading instructions and staying alert.
Emphasizes user safety through protective equipment, alertness, and preventing unintentional starts.
Outlines safety rules for battery tool use, charging, and handling to prevent fire or injury.
Provides essential safety instructions for handling, charging, and storing battery cartridges to prevent injury or fire.
Provides guidance on performing fastening operations, noting that torque may vary based on screw, bolt, and material.
To Next Page
