To Next PageTo Next Page
Need help?Do you have a question about the Makita DTD152Z and is the answer not in the manual?
General| Drilling | Yes |
|---|---|
| Handle shape | Pistol handle |
| Product type | Impact driver |
| Product color | Black, Blue |
| Chuck diameter | 1/4\ |
| Power source | Battery |
| Battery voltage | 18 V |
| Battery capacity | 6 Ah |
| Torque (max) | 165 N⋅m |
| Idle speed (max) | 3500 RPM |
| Idle speed (min) | 0 RPM |
Weight and Dimensions| Height | 137 mm |
|---|---|
| Weight | 1600 g |
The tool is designed for screw driving in wood, metal, and plastic materials.
Details typical A-weighted noise levels and uncertainty according to EN60745.
Presents vibration total value and uncertainty according to EN60745 for impact tightening.
Instructions for securely installing and removing the battery cartridge from the tool.
Explanation of the system that cuts off power to extend battery life due to overload or low voltage.
How to check the remaining battery capacity using indicator lamps on specific battery models.
Details on operating the switch trigger for starting, stopping, and controlling tool speed.
Instructions for using the LED lamp by pulling the switch trigger.
Guidance on how to install and remove driver bits and socket bits correctly.
Instructions for attaching the hook for temporary hanging of the tool.
Information on determining proper fastening torque based on time and screw/bolt types.
Step-by-step guide for checking and replacing worn carbon brushes.
