Need help?Do you have a question about the Makita DTD155 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 140 Nm |
| No Load Speed | 0-3, 000 RPM |
| Impacts Per Minute | 0-3, 900 IPM |
| Drive | 1/4" Hex |
| Battery Type | Lithium-Ion |
| Length | 135 mm |
General safety advice applicable to all power tools.
Guidelines for maintaining a safe work environment.
Precautions related to electrical hazards and tool usage.
Advice on operator alertness and personal protective measures.
Proper methods for operating and maintaining power tools.
Guidelines for using and caring for battery-powered tools.
Specific safety precautions for cordless impact drivers.
Critical safety information for battery cartridges.
Advice on how to prolong the lifespan of battery cartridges.
Step-by-step guide for battery installation and removal.
How to check the battery charge level using indicator lamps.
Explanation of systems that protect the tool and battery.
How the tool prevents damage from excessive current draw.
How the tool stops automatically when overheating.
How the tool stops when battery capacity is too low.
How to operate the tool's trigger for speed control.
How to turn on and control the tool's front lamp.
How to change the direction of the tool's rotation.
How to adjust the tool's impact force settings.
Instructions for fitting and removing bits and sockets.
How to attach the tool's hanging hook.
Guidance on fastening torque for standard bolts.
Guidance on fastening torque for high tensile bolts.
To Next Page
